Replacing a Starter Cable

A. With a standard 500 engine (if you have a 126 engine, please see section B) Remove the end fixing of the inner cable by bending the split pin legs straight and pulling it out. Pliers will be needed. Unless the pin it is perfect, discard it, as it is always best to use a new split pin when re attaching the fixing. Inside the car undo the 2 bolts holding down the Starter and Choke lever assembly. It is often easier to remove the 2 front seats, by holding the forward / back lever up and pushing the seats FORWARD off the … Continue reading Replacing a Starter Cable